Top 10 Dryer Exhaust Hose 4 Inch – Clothes Dryer Replacement Vents

As an Amazon Associate I earn from qualifying purchases.

1. TOMOON

#ad

Aluminum Foil Dryer Duct Hose,Flexible Dryer Exhaust Hose10 Foot By 4 Inch- Perfect For Hvac Ventilation, Kitchens.Grow Tent,Green Houses. Includes 2 Metal Clamps By TOMOON

#ad
TOMOON #ad - If you are not sure whether this Dryer vent hose correctly fit you, please feel free to contact us or ask a question through Amazon. Fire resistant dryer duct: forms a tight seal to direct fumes and humidity safely away from living spaces.

Aluminum foil laminate that encapsulates a high density, corrosion resistant wire helix - constructed to replace inferior vinyl ducts. Buy with confidence for any reason you're not completely satisfied, you can ask for a replacement or full refund. Ducting size :4inch x 10feet flexible aluminum Duct Compatible with front-load and top-load dryers, Includes 2 Screw Clamps. Fire resistant dryer duct: forms a tight seal to direct fumes and humidity safely away from living spaces.

Aluminum foil laminate that encapsulates a high density, corrosion resistant wire helix - constructed to replace inferior vinyl ducts. High quality:four layer design makes it more durable and resistant to leaks, and cuts. Ducting material: high-quality aluminum High Temperature Resistant & Corrosion Resistant & Long Lasting, tears, Clamps Material: Stainless steel.
BrandTOMOON #ad
Manufacturerwsh supplier #ad
Part NumberDryer vent hose

2. ZIGGURAT PRODUCTS

#ad

Ziggurat Dryer Duct Connector | STV-90 Version 2 | Laundry Dryer Snap to Vent 90 Degree Elbow

#ad
ZIGGURAT PRODUCTS #ad - Does the trick: the snap-to-vent simple design gives you the power to hook up your dryer in just a matter of a few minutes. No more fiddling around with rigid metal dryer clamps! Saves you money: our silicon seal ring gives you an airtight dryer connection, making your dryer more efficient while using less energy.

You don’t need to go searching for the right sized clamp anymore--we’ve got you covered! Effortless and durable: our sturdy elbow connector makes set up simple and a one-time project. Your stv-90 is sure to last longer than any other duct clamp out there! Simply slide it on and push your dryer back.

This means your clothes get dryer faster and you save money on your power bill! Avoid the headache: the stv-90 lets you to push your dryer up against your wall without kinking or crushing the hose and losing airflow. Works with your hose: we’ve updated our design to fit any 4” vent ducting, whether beveled or straight.
BrandZIGGURAT PRODUCTS #ad
ManufacturerDesign-Tek #ad
Height5.5 Inches
Length6.25 Inches
Weight0.5 Pounds
Width4.5 Inches
Part NumberSTV-90
ModelSTV-90

3. VICKMALL

#ad

Kitchen,Portable Air Conditioner…, VICKMALL Air Duct Hose, Grow Tents, Dryer Rooms, 4 Inch 10FT Flexible Ducting Dryer Vent Hose with 2 Clamps Great for HVAC Duct

#ad
VICKMALL #ad - Quality warranty: we provide 12 months quality warranty, if you have any question please contact us and we will reply and help you solve the problem in 24 hours. It will move and deliver air in kitchens cooking exhaust, bathrooms Smell and Moisture Exhaust, Dryer Rooms, Green Houses and Grow Rooms Air Circulation, Intake, Exhaust and Light Fixture Cooling, Grow Tents and other applications etc.

Widely used: the ducting is suitable for hvac system. Come with two clamps to help you fixed the air ducting. Easy to install and use: this ducting is 10 ft long when fully extended, and the ducting can bend freely.

Suitable size: the duct is 4 inch diameter and 10 ft length, You can cut into different lengths according to your needs. High quality material: under the black pvc layer the ducting is built with 2 layers of aluminum foil with a layer of PET and steel wire helix to preserve the shape, keep your ventilation system free of rips and pin holes.
BrandVICKMALL #ad
ManufacturerVICKMALL #ad

4. Lambro

#ad

Silver, Lambro Industries, 4 inch. Item #4006, Dryer Vent Close Elbow Kit

#ad
Lambro #ad - Resists crushing and maintains maximum airflow. Space saving design. Prevents excess lint buildup due to a smooth interior surface. Swivel connectors on close elbows allow moving dryer without disconnecting. Flexible semi-rigid aluminum triple-lock design for more durability.
BrandLambro #ad
ManufacturerLambro Industries, Inc #ad
Height4.75 Inches
Length20.5 Inches
Weight2.25 Pounds
Width12.25 Inches
Part Number4006
Model4006
WarrantyAs Labelled

5. Kraftex

#ad

Bathroom, Dryer Rooms, Ventilation, Dryer Vent Hose, 4 Inch Ducting with Flexible Aluminum Foil Coating 25ft for Exhaust, Fan Filter and Cooling. 1 x HVAC Vent Tubing with 2 Clamps for Kitchen

#ad
Kraftex #ad - Long-lasting our dryer exhaust hose has been made to last, thanks to its strong & flexible construction. The dryer duct is perfect for tumble dryers, heating/cooling systems, kitchen/bathroom extractor fans, & greenhouses. The extra length makes it easy to connect from one outlet to another.

Multi-layer design our 4” dryer vent duct is made from a flame-resistant aluminium foil temp range: -30°c to 150°c. We truly believe our 4 inch flexible duct is the best in the marketplace and we stand by that. Wide application here is our new silver 4” dryer hose length: 1. 1ft-25ft designed for various air circulation and ventilation projects. So, click “add to Cart” now and buy with confidence. The flexible dryer vent hose is corrosion resistant, and also tough enough to ensure it doesn’t tare when moved.

Simply tighten the clamps with a Phillip screwdriver, and enjoy the results. This will prevent any unwanted cold or hot air entering your home, resulting in lower energy costs. If our 4 inch aluminium ducting has left you feeling hot & bothered, we’ll FULLY REFUND YOU. Easy to install our hvac ducting can be installed in no time. The dryer duct hose is also protected by a PVC Thermoplastic outer layer and reinforced with a steel wire spiral for support.
BrandKraftex #ad
ManufacturerKraftex #ad
Part Number13

6. MyLifeUNIT

#ad

4 Inch Dia. Y Shape, Duct Splitter for Exhaust Fan Dryer Vent Hose, MyLifeUNIT 3 Way Duct Connector

#ad
MyLifeUNIT #ad - It can be used outdoors and indoors, even if it is exposed to the sun and rain. The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. The duct connector is a three-hole connector with two branches.

It is free of heavy metals, it is a material with high strength, with the features of environmentally friendly, safe and non-toxic. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. It is small in size, so it doesn't take up space. Made of premium abs plastic, good toughness and easy processing. Don't worry about leaking air after installation.

At the same time, it can discharge air from each part in the ventilation project. Finally, suitable for hoses of 100 mm 4 Inch. Measures it has a diameter of 95 mm 3. 7 inch per interface, then dock it with the hose and fix it with aluminum foil tape. Wipe the tee when using it, install the clamp and tighten the screw. The dryer duct connector is seamlessly connected to achieve a good leakproof effect.
BrandMyLifeUNIT #ad
ManufacturerMyLifeUNIT #ad
Height5.91 Inches
Length5.91 Inches
Width3.74 Inches
Part NumberKT18XH072
ModelKT18XH072-A

7. Vent Systems

#ad

Vent Systems 4'' Inch 45 Degree Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan, Duct Hose Dryer Vent T Connector, 4 Inch 3 Way Fitting

#ad
Vent Systems #ad - The duct connector is a three-hole - 3 way connector with two branches. At the same time, it can discharge air from each part in the ventilation project. It is small in size, so it doesn't take up space.

The dryer duct connector is seamlessly connected to achieve a good leakproof effect. The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. Don't worry about leaking air after installation. Finally, install the clamp and tighten the screw. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. It is suitable for hoses of 100 mm 4 inch. Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. It can be used outdoors and indoors, even if it is exposed to the sun and rain.
BrandVent Systems #ad
ManufacturerVent Systems #ad

8. Konduone

#ad

KONDUONE 4 Inch 8 Feet Clothes Dryer Vent Hose, Fits for Whirlpool Kenmore Maytag Electrolux LG GE Samsung Washer Dryer Transition Ducting Flex Aluminum Exhaust Pipe Flex Air Aluminum Dryer Vent Hose

#ad
Konduone #ad - Compatible - fits most commonly used electric and gas dryers from Whirlpool, GE, LG, Maytag, Samsung, Kenmore, Electrolux, Amana, and more. Warranty & support - truly worry-free 3-month warranty and friendly customer service.

Excellent product performance - made from durable high-quality material and well-tested before shipping. Dryer vent hose - 4 inch 8 feet, with 2 clamps. Dryer hose is the flexible material that can be used to transition between the dryer and the duct. If the dryer vent hose fails, feel freely to contact us. It will fit perfectly when properly installed to an exhaust duct, it provides a safe and proper airflow to speed up drying time. It should be used sparingly, stretched tight, not smashed, and replaced regularly. Quick repair - this is a pretty easy repair, simply remove the old hose and replace it with the new one.
BrandKonduone #ad
ManufacturerKONDUONE #ad
Part NumberFBA 50000202

9. REPA MARKET

#ad

Y Shape, Duct Splitter for Exhaust Fan Dryer Vent Hose 3 Way Duct Hose Connector, T Joint Metal 4'' Inch, T Shape

#ad
REPA MARKET #ad - The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. This is a three-hole connector with two branches. This connector is durable and long lasting.

It is small in size, so it doesn't take up space. The dryer duct connector is seamlessly connected to achieve a good leakproof effect. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. Made of high quality metal, it is a material with high strength, good toughness and easy processing. It can be used outdoors and indoors, even if it is exposed to the sun and rain.

The use of our 3 way duct connector saves on construction costs and significantly reduces the overall cost compared to conventional cast iron connector of the same specification. At the same time, it can discharge air from each part in the ventilation project. With the features of environmentally friendly, safe and non-toxic. Don't worry about leaking air after installation.
BrandREPA MARKET #ad
ManufacturerREPA MARKET #ad

10. Awenta

#ad

Y- Shape, Duct Splitter for Exhaust Fan Dryer Vent Hose 3 Way Duct Hose Connector, T Joint Metal 4'' Inch, T Shape

#ad
Awenta #ad - This connector is durable and long lasting. The dryer duct connector is seamlessly connected to achieve a good leakproof effect. With the features of environmentally friendly, it is a material with high strength, safe and non-toxic.

The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. It can be used outdoors and indoors, even if it is exposed to the sun and rain. This is a 4'' inch three-hole connector with two branches. It is small in size, so it doesn't take up space.

At the same time, it can discharge air from each part in the ventilation project. Made of high quality metal, good toughness and easy processing. Don't worry about leaking air after installation. The use of our 3 way duct connector saves on construction costs and significantly reduces the overall cost compared to conventional cast iron connector of the same specification.
BrandAwenta #ad
ManufacturerAwenta #ad